ECS 24 Shop Equipment

Item 001: Lift System (Quantity: 2 Each)The contractor shall provide a cable-connected, battery-powered mobile column lift system (reference part number CB-9-4-AJ or equal). The system must consist of four columns equipped with 15-inch forks and an adjustable width carriage (520mm to 900mm) capable of accommodating a minimum 10.9-inch rim. The lift must support a minimum of 16,000 lbs. per column, providing a total system capacity of at least 64,000 lbs.Item 002: Military Floor Jack (Quantity: 3 Each)The requirement is for a military-grade hydraulic floor jack (reference part number WS-1945-PKG2 or equal) designed to lift the front or rear of tactical vehicles. It must have a capacity of 45,000 lbs. (22.5 Tons) and feature 18-inch height pistons (capable of reaching 28 inches off the ground) with interchangeable quick connects. The system must include adapter pairs 4101, 4102, 4103, and 4105, as well as specific lifting shackles for HEMTT, FMTV, MTVR, M916, and M920 vehicles (equivalent to WSA-AA4104 through WSA-AK4104 for front and rear applications).Item 003: Waste Oil Drain (Quantity: 2 Each)The contractor shall provide a self-evacuating waste oil drain (reference part number WS-WOD-31XL or equal) with a 31-gallon reservoir capacity. The unit must be convertible and include suction wands for fluid extraction.Item 004: Transmission Jack (Quantity: 1 Each)Provide a heavy-duty, electro-mechanical transmission jack (reference part number AH-4000 or equal) with a minimum load rating of 4,000 lbs.Item 005: Lifting Table (Quantity: 1 Each)Provide an electric-hydraulic lifting table (reference part number TT-2000 or equal) operating on 115VAC power with a 2,000 lb. capacity. The tabletop must measure 18.5 inches by 36 inches, with an adjustable height ranging from a 36-inch minimum to a 72.5-inch maximum.Item 006: Air/Hydraulic Jack (Quantity: 1 Each)This item is a three-step air/hydraulic jack (reference part number WS-19101 or equal) featuring a multi-stage capacity of 55,000, 110,000, and 176,000 lbs. The elevation range must be a 12-inch minimum to a 33-inch maximum. The jack must include universal adapters equivalent to A02354, A02406, and A02410.Item 007: Air/Hydraulic Jack (Quantity: 2 Each)Provide a three-step air/hydraulic jack (reference part number WS-16236 or equal) featuring a multi-stage capacity of 40,000, 66,000, and 132,000 lbs. The elevation range must be a 7-inch minimum to a 16.5-inch maximum. The jack must include adapters equivalent to A02354, A02406, and A02410.Item 008: High Lift Wheel Dolly (Quantity: 1 Each)The requirement is for a manual high-lift wheel dolly (reference part number WS-AH20330 or equal) with a minimum load capacity of 1,500 lbs.Item 009: Brake Hub Jack (Quantity: 2 Each)Provide a brake hub removal jack (reference part number WS-18-HR or equal) equipped with an integrated tool tray and a 1,100 lb. capacity. The jack must include universal adapters equivalent to models 9307 and 9316.Item 010: Stud Adapter (Quantity: 2 Each)Provide a 10-stud adapter (reference part number WSA-9307 or equal) fully compatible with the brake hub jacks required in Item 009.Item 011: Drum Brake Adapter (Quantity: 2 Each)Provide a drum brake adapter without a ratchet strap (reference part number WSA-9319 or equal), fully compatible with the brake hub jacks required in Item 009.Item 012: Ratchet Strap (Quantity: 2 Each)Provide a specialized ratchet strap (reference part number WSA-9509 or equal) designed for use with the drum adapter on the brake hub jacks.Item 013: Stud Adapter (Quantity: 2 Each)Provide an over-the-road 10-stud adapter (reference part number WSA-9316 or equal) fully compatible with the requested brake hub jacks.Item 014: Extension Riser Kit (Quantity: 8 Each)The contractor shall provide a 16-piece extension riser kit (reference part number FRLT-M-EXT or equal) compatible with standard mobile column lifts. The kit must contain four (4) each of 2-inch, 4-inch, 6-inch, and 8-inch risers.Item 015: Light Truck Adapter (Quantity: 1 Each)Provide a light truck adapter pair (reference part number FRLT-M-AJ or equal). This adapter must be compatible with mobile column lifts featuring adjustable carriages (using 13-inch or 15-inch forks) and 32-inch/820mm carriages (using 16-inch forks). It requires a 9.5-inch minimum clearance and must have a rated capacity of 18,000 lbs. per pair.